{"title":"Components","description":"Explore our range of components and parts for your Raspberry Pi or other project","products":[{"product_id":"adafruit-flex-cable-for-raspberry-pi-camera-or-display-24-610mm","title":"Adafruit 1731 - Flex Cable for Raspberry Pi Camera or Display - 24\" \/ 610mm","description":"This cable will will allow you to swap out the standard Raspberry Pi Camera or Raspberry Pi Display cable for added mounting flexibility. \u003cbr\u003e\u003cbr\u003eThis cable is 610mm long (approximately 2 feet) and is compatible with all Raspberry Pi boards with standard camera or screen ports. \u003cbr\u003e\u003cbr\u003eAdafruit part: 1731.","brand":"PepperTech Digital","offers":[{"title":"Default Title","offer_id":39446940221631,"sku":"PTD10158","price":2.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0397\/0646\/0314\/products\/1731-04.jpg?v=1616689658"},{"product_id":"adafruit-gpio-ribbon-cable-for-raspberry-pi-model-a-b-pi-2-pi-3-pi-4-40-pins","title":"Adafruit 1988 - GPIO Ribbon Cable for Raspberry Pi Model A+\/B+\/Pi 2\/Pi 3\/Pi 4 - (40 pins)","description":"That new Raspberry Pi® Model B+ computer you just got has a row of 2x20 pin headers soldered on - those are the GPIO (general purpose input\/output) pins and for those of us who like to hack electronics, they are where the real fun is. By programming the Pi, you can twiddle those pins high or low, send and receive I2C and SPI data, and access the 3V and 5V power rails.\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eNote: This cable is not compatible with the Raspberry Pi Model B or Model A.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eIf you want to bridge those contacts out onto another PCB, you'll want this cable! It's 6\" long and has 40 socket \u0026amp; wire sets. Pin #1 is marked with a white wire.\u003cbr\u003e\u003cbr\u003e It's available in custom Adafruit Black and is an essential accessory for getting started with your brand new Raspberry Pi.\u003cbr\u003e\u003cbr\u003e Note: Compatible with Raspberry Pi Model A+, Raspberry Pi 2, Raspberry Pi 3, and Raspberry Pi 4.\u003cbr\u003e\u003cbr\u003e Adafruit part: 1988","brand":"PepperTech Digital","offers":[{"title":"Default Title","offer_id":39450664599743,"sku":"PTD10191","price":6.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0397\/0646\/0314\/products\/1988-00.jpg?v=1616723359"},{"product_id":"adafruit-trinket-m0-for-use-with-circuitpython-arduino-ide","title":"Adafruit 3500 - Trinket M0 - for use with CircuitPython \u0026 Arduino IDE","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe Adafruit Trinket M0 may be small, but do not be fooled by its size! It's a tiny microcontroller board, built around the Atmel ATSAMD21, a little chip with\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cem data-mce-fragment=\"1\"\u003ea lot\u003c\/em\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eof power. We wanted to design a microcontroller board that was small enough to fit into any project, and low cost enough to use without hesitation. Perfect for when you don't want to give up your expensive dev-board and you aren't willing to take apart the project you worked so hard to design. It's our lowest-cost CircuitPython programmable board!\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWe've taken the same form factor we used for the original ATtiny85-based Trinket and gave it an upgrade. The Trinket M0 has swapped out the lightweight ATtiny85 for a ATSAMD21E18 powerhouse. It's just as small, and it's easier to use, so you can do more.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe most exciting part of the Trinket M0 is that while you can use it with the Arduino IDE, we are shipping it with CircuitPython on board. When you plug it in, it will show up as a very small disk drive with main.py on it. Edit main.py with your favorite text editor to build your project using Python, the most popular programming language. No installs, IDE or compiler needed, so you can use it on any computer, even ChromeBooks or computers you can't install software on. When you're done, unplug the Trinket M0 and your code will go with you. Please check out the Trinket M0 CircuitPython guide for a list of capabilities and quick-start code examples\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e- CircuitPython is easier to code but not as low-level and complete as Arduino.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eHere are some of the updates you can look forward to when using Trinket M0:\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSame size, form-factor, and pinout as classic Trinket\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eUpdating ATtiny85 8-bit AVR for ATSAMD21E18 32-bit Cortex M0+\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e256KB Flash - 32x as much as 8 KB on ATtiny85\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e32 KB RAM - 64x as much as 512 bytes on ATtiny85\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e48 MHz 32 bit processor - 6x as fast as ATtiny85 (not even taking into account 32-bit speedups)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eNative USB supported by every OS - can be used in Arduino or CircuitPython as USB serial console, Keyboard\/Mouse HID, even a little disk drive for storing Python scripts. (ATtiny85 does not have native USB)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCan be used with Arduino IDE or CircuitPython\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBuilt in green ON LED\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBuilt in red pin #13 LED\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBuilt in RGB DotStar LED\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAll 5 GPIO pins are available and are not shared with USB - so you can use them for whatever you like!\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFive GPIO pins with digital input\/output with internally connected pullups or pulldowns\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAll of the I\/O pins can be used for 12-bit analog input\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eTrue analog output on one I\/O pin - can be used to play 10-bit quality audio clips in Arduino (CircuitPython does not have storage for audio clips)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eWe gave the M0 pads the exact same names as the original Trinket so all your existing Arduino code will work exactly the same as-is without changes\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eTwo high speed PWM outputs - for servos, LEDs, etc\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eThree pins can also be used as hardware capacitive touch sensors with no additional components required\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCan drive NeoPixels or DotStars on any pins, with enough memory to drive 8000+ pixels. DMA-NeoPixel support on one pin so you can drive pixels without having to spend any processor time on it.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eNative hardware SPI, I2C and Serial available on two pads so you can connect to any I2C or Serial device with true hardware support (no annoying bit-banging). You can have either one SPI device or both I2C and Serial.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSame Reset switch for starting your project code over\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePower with either USB or external output (such as a battery) - it'll automatically switch over\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMounting holes! Yeah!\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eReally really small\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eEach order comes with one fully assembled and tested Trinket M0 with CircuitPython \u0026amp; example code programmed in.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSo what are you waiting for? Pick up a Trinket M0 today and be amazed at how easy and fast it is to get started with Trinket and CircuitPython!\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eAdafruit part: 3500\u003c\/p\u003e","brand":"PepperTech Digital","offers":[{"title":"Default Title","offer_id":39450792526015,"sku":"PTD10162","price":9.49,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0397\/0646\/0314\/products\/3500-00.jpg?v=1616724772"},{"product_id":"terrapi-usb-2-to-sata-adapter","title":"TerraPi VIA USB 2 to SATA Adapter","description":"This USB 2 to SATA adapter connects the SSD to your Raspberry Pi.\u003cbr\u003e\u003cbr\u003eYou can connect up to 2 adapters to the Raspberry Pi USB 2 ports, making it a perfect match for the TerraPi single and dual SSD cases.\u003cbr\u003e\u003cbr\u003e Technical information:\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eLow power consumption (0.5W)\u003c\/li\u003e\n\u003cli\u003eFull speed operation at 12Mbps\u003c\/li\u003e\n\u003cli\u003eHigh speed operation at 480Mbps\u003c\/li\u003e\n\u003cli\u003eSuper High speed operation at 5Gbps\u003c\/li\u003e\n\u003cli\u003eAllows for USB 2 booting from SSD for Raspberry Pi 4\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PepperTech Digital","offers":[{"title":"Default Title","offer_id":39455041126591,"sku":"PTD10232","price":9.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0397\/0646\/0314\/products\/via-usb3-to-sata-adapter-for-ssd-drives.jpg?v=1616765214"},{"product_id":"adafruit-254-microsd-card-breakout-board","title":"Adafruit 254 - MicroSD card breakout board+","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eNot just a simple breakout board, this microSD adapter goes the extra mile - designed for ease of use.\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eOnboard 5v-\u0026gt;3v regulator provides 150mA for power-hungry cards\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e3v level shifting means you can use this with ease on either 3v or 5v systems\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eUses a proper level shifting chip, not resistors: less problems, and faster read\/write access\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eUse 3 or 4 digital pins to read and write 2Gb+ of storage!\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eActivity LED lights up when the SD card is being read or written\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFour #2 mounting holes\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePush-push socket with card slightly over the edge of the PCB so its easy to insert and remove\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eComes with 0.1\" header (unattached) so you can get it on a breadboard or use wires - your choice\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eTested and assembled here at the Adafruit factory\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eWorks great with Arduino, with tons of example code and wiring diagrams\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eTo use with an Arduino, connect\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003eGND\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eto ground,\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003e5V\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eto 5V,\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003eCLK\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eto pin 13,\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003eDO\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eto pin 12,\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003eDI\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eto pin 11, and\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003eCS\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eto pin 10. Then you can use the Arduino IDE's SD library which supports FAT and FAT32 SD cards.\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eTechnical Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eDimensions (without 0.1\" header):\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLength: 31.85mm\/1.25in\u003c\/li\u003e\n\u003cli\u003eWidth: 25.4mm\/1.00in\u003c\/li\u003e\n\u003cli\u003eHeight: 3.75mm\/0.15in\u003c\/li\u003e\n\u003cli\u003eWeight: 3.43g\/0.12oz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAdafruit part: 254\u003c\/p\u003e","brand":"PepperTech Digital","offers":[{"title":"Default Title","offer_id":39555409805503,"sku":"PTD10250","price":8.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0397\/0646\/0314\/products\/254-05.jpg?v=1617934905"},{"product_id":"adafruit-3296-ds1307-real-time-clock-assembled-breakout-board","title":"Adafruit 3296 - DS1307 Real Time Clock Assembled Breakout Board","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis is a great battery-backed real time clock (RTC) that allows your microcontroller project to keep track of time even if it is reprogrammed, or if the power is lost. Perfect for datalogging, clock-building, time stamping, timers and alarms, etc. The\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003eDS1307\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eis the most popular RTC - but it\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cem data-mce-fragment=\"1\"\u003erequires\u003c\/em\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e5V power to work (although we've used it with 5V power and 3.3V logic successfully)\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePCB \u0026amp; header are included\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePlugs into any breadboard, or you can use wires\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eTwo mounting holes\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eWill keep time for 5 years or more\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eNote: This product does not come with a CR1220 coin cell battery. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe DS1307 is simple and inexpensive but not a high precision device. It may lose or gain up to 2 seconds a day. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eAdafruit part: 3296\u003c\/p\u003e","brand":"PepperTech Digital","offers":[{"title":"Default Title","offer_id":39555416948927,"sku":"PTD10251","price":6.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0397\/0646\/0314\/products\/3296-00.jpg?v=1617935388"},{"product_id":"google-coral-usb-accelerator","title":"Google Coral USB Accelerator","description":"\u003cp\u003eThe USB Accelerator is a USB accessory that adds machine learning inferencing to the Raspberry Pi.\u003c\/p\u003e\n\u003cp\u003eThe USB Accelerator performs high-speed ML inferencing, up to 4 trillion operations per second.   The device supports TensorFlow Lite and AutoML.\u003c\/p\u003e\n\u003cp\u003eIncludes USB 3.0 Type-C cable to connect to your Raspberry Pi.  The device is USB-C powered.\u003cbr\u003e\u003c\/p\u003e","brand":"PepperTech Digital","offers":[{"title":"Default Title","offer_id":39938535686335,"sku":"PTD10012","price":129.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0397\/0646\/0314\/products\/GoogleEdgeTPUBox.jpg?v=1622581562"},{"product_id":"adafruit-ultimate-gps-breakout-66-channel-w-10-hz-updates-version-3","title":"Adafruit Ultimate GPS Breakout - 66 channel w\/10 Hz updates - Version 3","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWe believe this is the\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003eUltimate\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eGPS module, so we named it that. It's got everything you want and more:\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e-165 dBm sensitivity, 10 Hz updates, 66 channels\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e5V friendly design and only 20mA current draw\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBreadboard friendly + two mounting holes\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eRTC battery-compatible\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBuilt-in datalogging\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePPS output on fix\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eInternal patch antenna + u.FL connector for external active antenna\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFix status LED\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eNew! Version 3 comes with the latest module which has external antenna support and Pulse-Per-Second output\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eKey Features:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSatellites: 22 tracking, 66 searching\u003c\/li\u003e\n\u003cli\u003ePatch Antenna Size: 15mm x 15mm x 4mm\u003c\/li\u003e\n\u003cli\u003eUpdate rate: 1 to 10 Hz\u003c\/li\u003e\n\u003cli\u003ePosition Accuracy: \u0026lt; 3 meters (all GPS technology has about 3m accuracy)\u003c\/li\u003e\n\u003cli\u003eVelocity Accuracy: 0.1 meters\/s\u003c\/li\u003e\n\u003cli\u003eWarm\/cold start: 34 seconds\u003c\/li\u003e\n\u003cli\u003eAcquisition sensitivity: -145 dBm\u003c\/li\u003e\n\u003cli\u003eTracking sensitivity: -165 dBm\u003c\/li\u003e\n\u003cli\u003eMaximum Velocity: 515m\/s\u003c\/li\u003e\n\u003cli\u003eVin range: 3.0-5.5VDC\u003c\/li\u003e\n\u003cli\u003eMTK3339 Operating current: 25mA tracking, 20 mA current draw during navigation\u003c\/li\u003e\n\u003cli\u003eOutput: NMEA 0183, 9600 baud default, 3V logic level out, 5V-safe input\u003c\/li\u003e\n\u003cli\u003eDGPS\/WAAS\/EGNOS supported\u003c\/li\u003e\n\u003cli\u003eFCC E911 compliance and AGPS support (Offline mode : EPO valid up to 14 days )\u003c\/li\u003e\n\u003cli\u003eUp to 210 PRN channels\u003c\/li\u003e\n\u003cli\u003eJammer detection and reduction\u003c\/li\u003e\n\u003cli\u003eMulti-path detection and compensation\u003c\/li\u003e\n\u003c\/ul\u003e\nAdafruit Part: 746","brand":"PepperTech Digital","offers":[{"title":"Default Title","offer_id":40400587030719,"sku":"PTD10155","price":49.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0397\/0646\/0314\/products\/746-11-1000.jpg?v=1628363429"},{"product_id":"vantec-usb-3-0-to-sata-adapter-for-2-5-ssd-6gb-s","title":"Vantec USB 3.0 to SATA Adapter for 2.5\" SSD - 6Gb\/S (CB-STU3-2PB)","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis 6Gbps high performance USB 3.0 to SATA III (backwards compatible with SATA II\/I) Adapter and cable for USB 3.0 to 2.5 inch SATA is a great addition to the TerraPi Raspberry Pi SSD cases.\u003cbr\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe cable configuration of this USB 3.0 to SATA adapter is ideal for vertical placement of the SSD because of the short cable length.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe Vantec \u003cmeta charset=\"utf-8\"\u003e\u003cspan data-ng-mouseover=\"showPopover()\" data-ng-mouseleave=\"hidePopover()\" class=\"ng-binding\" data-original-title=\"\" title=\"\" data-mce-fragment=\"1\"\u003eCB-STU3-2PB\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eadapter i\u003cspan data-mce-fragment=\"1\"\u003es fast, using Super Speed USB 3.0 and UASP protocol for exceptional data transfer performance.  \u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis adapter uses power from the USB port and supports 2.5 inch SSD drives.  Note that HDD devices require an externally powered adapter.   \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eIt is a great choice for Raspberry Pi NAS cases and other projects with external SSD storage.\u003c\/p\u003e","brand":"PepperTech Digital","offers":[{"title":"Default Title","offer_id":41056765804735,"sku":"PTD10274","price":12.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0397\/0646\/0314\/products\/INUXPigtailSATABlack_b07fde93-b601-4540-a7f1-3fbac6464736.jpg?v=1638136107"},{"product_id":"kingston-32gb-canvas-select-plus-class-10-uhs-i-u1-microsdhc","title":"Kingston 32GB Canvas Select Plus Class 10\/UHS-I (U1) microSDHC","description":"\u003cp\u003eHigh performance (up to 100 MB\/s) Class 10 SD card with 32GB storage capacity.\u003c\/p\u003e\n\u003cp\u003eCompatible with Raspberry Pi computers and may be flashed with Raspberry Pi OS or Ubuntu.\u003c\/p\u003e","brand":"PepperTech Digital","offers":[{"title":"Default Title","offer_id":41129303769279,"sku":"PTD10080","price":6.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0397\/0646\/0314\/products\/1061336065.jpg?v=1639444696"},{"product_id":"google-coral-camera","title":"Google Coral Camera","description":"The Google Coral Camera is a 5-megapixel camera module that's compatible with the Coral Dev Board. \u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eKey Features:\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e5-megapixel camera module\u003c\/li\u003e\n\u003cli\u003eCompatible with Coral Dev Board\u003c\/li\u003e\n\u003cli\u003eConnects to Dev Board via CSI interface\u003c\/li\u003e\n\u003cli\u003eOmnivision OV5645 SoC sensor\u003c\/li\u003e\n\u003cli\u003eAuto focus, range: 10cm-infinity, field of view: 84.0 \/ 87.6 degrees\u003c\/li\u003e\n\u003cli\u003eIncludes: auto exposure control and white balance, auto band filter, auto 50\/60Hz lamination and auto blacklevel calibration\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PepperTech Digital","offers":[{"title":"Default Title","offer_id":41271167221951,"sku":"PTD10010","price":34.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0397\/0646\/0314\/products\/GoogleCam-1.jpg?v=1643477687"},{"product_id":"official-raspberry-pi-1m-hdmi-cable-white","title":"Official Raspberry Pi 1m HDMI Cable (White)","description":"\u003cp\u003eOfficial Raspberry Pi 1 meter HDMI Type A (male) to HDMI Type A (male) cable.\u003c\/p\u003e\n\u003cp\u003eCompatible with Raspberry Pi 1, 2, 3 series boards.\u003c\/p\u003e\n\u003cp\u003eNOTE: Not compatible with Raspberry Pi 4 series boards.  Click \u003ca href=\"https:\/\/peppertech.io\/products\/official-raspberry-pi-1m-micro-hdmi-to-hdmi-cable-white-for-raspberry-pi-4\" title=\"HDMI cable for Raspberry Pi 4\"\u003ehere \u003c\/a\u003efor Raspberry Pi 4 Micro HDMI to HDMI Type A cable.\u003c\/p\u003e","brand":"PepperTech Digital","offers":[{"title":"Default Title","offer_id":41273449808063,"sku":"PTD10362","price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0397\/0646\/0314\/products\/RaspberryHDMI1m-White.jpg?v=1643577725"},{"product_id":"official-raspberry-pi-1m-hdmi-cable-black","title":"Official Raspberry Pi 1m HDMI Cable (Black)","description":"\u003cp\u003eOfficial Raspberry Pi 1 meter HDMI Type A (male) to HDMI Type A (male) cable.\u003c\/p\u003e\n\u003cp\u003eCompatible with Raspberry Pi 1, 2, 3 series boards.\u003c\/p\u003e\n\u003cp\u003eNOTE: Not compatible with Raspberry Pi 4 series boards.  Click \u003ca href=\"https:\/\/peppertech.io\/products\/official-raspberry-pi-1m-micro-hdmi-to-hdmi-cable-white-for-raspberry-pi-4\" title=\"HDMI cable for Raspberry Pi 4\"\u003ehere\u003c\/a\u003e for Raspberry Pi 4 Micro HDMI to HDMI Type A cable.\u003c\/p\u003e","brand":"PepperTech Digital","offers":[{"title":"Default Title","offer_id":41273451905215,"sku":"PTD10399","price":4.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0397\/0646\/0314\/products\/RaspberryPi1mHDMIBlack.jpg?v=1643578260"},{"product_id":"official-raspberry-pi-1m-micro-hdmi-to-hdmi-cable-white-for-raspberry-pi-4","title":"Official Raspberry Pi 1m Micro HDMI to HDMI Cable (White) for Raspberry Pi 4","description":"\u003cp\u003eOfficial Raspberry Pi 1 meter HDMI Micro HDMI (male) to HDMI Type A (male) cable for Raspberry Pi 4 series boards.\u003c\/p\u003e\n\u003cp\u003eNOTE: Not compatible with Raspberry Pi 1, 2 and 3 series boards.  Click \u003ca href=\"https:\/\/peppertech.io\/products\/official-raspberry-pi-1m-hdmi-cable-white\" title=\"HDMI cable for Raspberry Pi 3\"\u003ehere\u003c\/a\u003e for Raspberry Pi HDMI Type A to HDMI Type A cable.\u003c\/p\u003e","brand":"PepperTech Digital","offers":[{"title":"Default Title","offer_id":41273455935679,"sku":"PTD10239","price":6.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0397\/0646\/0314\/products\/RaspberryPiMicroHDMI1mWhite.jpg?v=1643579340"},{"product_id":"multicomp-pro-6ft-high-performance-hdmi-cable","title":"Multicomp Pro 6ft High Performance HDMI Cable","description":"\u003cp\u003eThis high performance HDMI Type A to HDMI Type A 18Gbps cable with Ethernet supports 4K video at refresh rates up to 60Hz.\u003c\/p\u003e\n\u003cp\u003eKey features include: support for bi-directional data and audio, audio return channel, supports 3D and 4K, gold plated connectors, 6 foot length.\u003c\/p\u003e\n\u003cp\u003eConnector color may vary.\u003c\/p\u003e\n\u003cp\u003eCompatible with ATEM and YoloBox products. \u003c\/p\u003e\n\u003cp\u003e* Ships free when combined with PK1 products over $99\u003c\/p\u003e","brand":"PepperTech Digital","offers":[{"title":"Default Title","offer_id":41273488998591,"sku":"PTD10118","price":6.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0397\/0646\/0314\/products\/MulticompPro6ftHDMI.jpg?v=1643582502"},{"product_id":"adafruit-5-0-40-pin-800x480-tft-display-without-touchscreen","title":"Adafruit 5.0\" 40-pin 800x480 TFT Display without Touchscreen","description":"This 5.0\" TFT screen has lots of pixels, 800x480 to be exact, and an LED backlight. Its great for when you need a lot of space for graphics. These screens are commonly seen in consumer electronics, such as miniature TV's, GPS's, handheld games car displays, etc. A 40-pin connector has 8 red, 8 green, and 8 blue parallel pins, for 24 bit color capability.\u003cbr\u003e\u003cbr\u003e\n\u003cstrong\u003eThis version does not have touchscreen attached.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\nThis is a \"raw pixel-dot-clock\" display and does not have an SPI\/parallel type controller or any kind of RAM. The display is supposed to be constantly refreshed, at 60Hz, with a pixel clock, V sync, H sync, etc. There are some high end processors such as that used in the BeagleBone that can natively support such RGB TTL displays. However, it is extremely rare for a small microcontroller to support it, as you need dedicated hardware or a very fast processor such as an FPGA. Not only that, but the backlight requires a constant-current mode boost converter that can go as high as 24V instead of our other small displays that can run the backlight off of 5V.\u003cbr\u003e\u003cbr\u003e\nFor that reason, we are carrying it as a companion to the Adafruit RA8875 driver board in the store, which is a chip that can handle the huge video RAM and timing requirements, all in the background. That's the best way to interface this display to just about any microcontroller (including Arduino \u0026amp; friends) If you want to control with from an HDMI or DVI output, check out our TFP401 driver board. If you are an advanced electronics enthusiast you can try wiring this directly to your processor, but it we don't have any support or tutorials for that purpose.\u003cbr\u003e\u003cbr\u003e\nAdafruit part number: 1680","brand":"PepperTech Digital","offers":[{"title":"Default Title","offer_id":41705142386879,"sku":"PTD10480","price":31.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0397\/0646\/0314\/products\/1680-Main.jpg?v=1654736828"},{"product_id":"adafruit-mini-metal-speaker-w-wires-8-ohm-0-5w","title":"Adafruit Mini Metal Speaker w\/ Wires - 8 ohm 0.5W","description":"Listen up! This tiny 1\" diameter speaker cone is the perfect addition to any small audio project where you need an 8 Ω impedance and will be using 0.5W or less of power. We particularly like this cone as it's very simple and its metal body is extremely lightweight. It's very similar to the speaker in the Drawdio kit.\u003cbr\u003e\u003cbr\u003e\nWorks great with Adafruit Wave shield or class D amplifier board. Just be careful not to overdrive it if you're using the class D amp breakouts as it can put 1.7W into the speaker, blowing it out! Start with lower volume and increase carefully.\u003cbr\u003e\u003cbr\u003e\nAdafruit part number: 1890","brand":"PepperTech Digital","offers":[{"title":"Default Title","offer_id":41705146089663,"sku":"PTD10481","price":2.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0397\/0646\/0314\/products\/1890-Main.jpg?v=1654737308"},{"product_id":"peppertech-digital-40mm-fan-kit-for-raspberry-pi","title":"PepperTech Digital 40mm Fan Kit for Raspberry Pi","description":"\u003cp\u003eThis kit is designed for Raspberry Pi single board computers and TerraPi cases.  The 40mm fan increases cooling while operating at lower RPM and sound levels.\u003c\/p\u003e\n\u003cp\u003eKit includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e40 x 40 x 10 mm 5v DC fan with connector for Raspberry Pi GPIO\u003c\/li\u003e\n\u003cli\u003e4 m3 hex nuts (black), which this fan is designed to accommodate\u003c\/li\u003e\n\u003cli\u003e4 m3 x 12mm screws (black)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFan is a 7-blade axial fan with sleeve bearing, providing 5cfm of cooling while producing approximately 29dba.\u003c\/p\u003e\n\u003cp\u003eThis fan is also ideal for printers and 3D printers.\u003c\/p\u003e","brand":"PepperTech Digital","offers":[{"title":"Default Title","offer_id":41775694905535,"sku":"PTD10490","price":3.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0397\/0646\/0314\/products\/PepperTech40mmFan-Main.jpg?v=1656992727"},{"product_id":"inux3d-din-rail-desktop-stand","title":"INUX3D DIN Rail Desktop Stand","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe INUX3D TerraPi DIN Rail Desktop Stand allows for desktop or other tabletop DIN Rail deployments.  This stand kit is compatible with the TerraPi D DIN Rail Mount for Raspberry Pi and can serve as the basis for an educational or test rig.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe stand kit includes the left and right side components and hardware necessary to attach the DIN Rail section (not included). \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eDimensions: \u003cmeta charset=\"utf-8\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e114 x 131 x 14 mm.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDIN Rail section, Raspberry Pi and other components are not included.\u003c\/strong\u003e\u003c\/p\u003e","brand":"PepperTech Digital","offers":[{"title":"Black","offer_id":41792846430399,"sku":"PTD10335","price":21.99,"currency_code":"USD","in_stock":false},{"title":"Grey","offer_id":41792846463167,"sku":"NOSKU01","price":21.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0397\/0646\/0314\/products\/DINRailStandv1-Grey-Main.jpg?v=1657475521"},{"product_id":"inux3d-din-rail-desktop-stand-v3","title":"INUX3D DIN Rail Desktop Stand v3","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eThis is a display-optimized version of the original DIN Rail Desktop Stand. It has no visible mounting holes in the front side and the DIN rail is not visible on the sides.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe INUX3D TerraPi DIN Rail Desktop Stand allows for desktop or other tabletop DIN Rail deployments.  This stand kit is compatible with the TerraPi D DIN Rail Mount for Raspberry Pi and can serve as the basis for an educational or test rig.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe stand kit includes the left and right side components and hardware necessary to attach the DIN Rail section (not included). \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eDimensions: \u003cspan data-mce-fragment=\"1\"\u003e120 x 102 x 14 mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eDIN Rail section, Raspberry Pi and other components are not included.\u003c\/strong\u003e\u003c\/p\u003e","brand":"PepperTech Digital","offers":[{"title":"Black","offer_id":41792850460863,"sku":"PTD10336","price":22.99,"currency_code":"USD","in_stock":false},{"title":"Grey","offer_id":41792850493631,"sku":"NOSKU02","price":22.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0397\/0646\/0314\/products\/INUXDINRailStandv3-Main.jpg?v=1657477080"},{"product_id":"adafruit-4823-40-pin-gpio-extension-cable-150mm","title":"Adafruit 4823-40 Pin GPIO Extension Cable-150mm","description":"\u003cp\u003eThat new Raspberry Pi 400 computer you just got has a row of 2x20 pin headers on the right side - those are the GPIO (general purpose input\/output) pins, and for those of us who like to hack electronics, they are where the real fun lies. By programming the Pi, you can twiddle those pins high or low, send and receive I2C and SPI data, and access the 3V and 5V power rails.\u003cbr\u003e\n\u003cbr\u003e\nUnlike the 'classic' Raspberry Pi computers, you can't really stick a HAT, bonnet, pHAT or other accessory\/add-on on top...what to do? Give up!? NO! Use this cable, which will act as an extender for all 40 pins to give you a streeeeetch of about 150mm \/ 6 inches. Simply plug the socket side into the Raspberry Pi with the white mark next to the Pin 1 label. Then on the other side, plug the hat down onto the plug side.\u003cbr\u003e\n\u003cbr\u003e\nAlso great for when you have a Raspberry Pi in a snazzy case or enclosure and you want to plug in an accessory\/HAT a few inches away.\u003cbr\u003e\n\u003cbr\u003e\nNote that some HATs, like the Sense HAT or Bonnets with a slim connector on the bottom will need\/benefit from adding a socket 'riser' \/ 'lifter' to the HAT to give the cable more connector body to grip onto. Take a look at the HAT or accessory you're trying to extend. If there isn't a chunky connector on the bottom of the HAT, pick up a riser!\u003cbr\u003e\n\u003cbr\u003e\nComes in Adafruit Black and is a necessary accessory for getting the most out of your Pi!\u003cbr\u003e\n\u003cbr\u003e\nNote: Any Raspberry Pi with a 2x20 connector will work wonderfully. For example Raspberry Pi Model A+, B+, 2, 3, 4, Zero... This cable is not compatible with the original 2x13 header Raspberry Pi Model B or Model A.\u003c\/p\u003e\n","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":42066305614015,"sku":"PTD10194","price":5.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0397\/0646\/0314\/products\/fda37de2-00fa-5def-9c15-dcde2434dd66.jpg?v=1667699088"}],"url":"https:\/\/peppertech-digital.myshopify.com\/collections\/components.oembed","provider":"PepperTech Digital","version":"1.0","type":"link"}